Skip to Content

Holybro SiK Telemetry Radio V3 433MHz 100mW

https://www.bzbuas.com/web/image/product.template/519/image_1920?unique=4d1f50c
Holybro SiK Telemetry Radio V3 433MHz 100mW is a versatile open-source radio platform, offering 300m+ range and easy plug-n-play compatibility with Pixhawk Standard and other flight controllers. With robust firmware designed for MAVLink integration, it simplifies telemetry connections between autopilots and ground stations. The radio operates at either 915Mhz or 433Mhz, so choose the appropriate model for your region. Additional features include adjustable output power, receive sensitivity, and a transparent serial link. It’s your reliable choice for efficient communication in the world of drones. 
291.87 zł 291.87 PLN VAT Excluded
291.87 zł VAT Excluded
Price on request

    This combination does not exist.

    Impressive range with Holybro SiK Telemetry Radio V3 433MHz 100mW

    This Holybro SiK Telemetry Radio V3 433MHz 100mW is a small, lightweight and inexpensive open source radio module that typically allows a range of better than 300 meters “out of the box” (the range can be extended to several kilometres with the use of a patch antenna on the ground). This radio is compatible with all Pixhawk Standard and other plug-n-play flight controllers, providing the easiest way to set up a telemetry connection between the autopilot and the ground station. It uses open source software that is specifically designed to work well with the MAVLink protocol and integrate with Mission Planner, Ardupilot, QGroundControl and PX4 Autopilot. The radios can operate in either 915 MHz or 433 MHz mode, and you should buy the model appropriate for your country/region.

    Holybro-SiK-Telemetry-Radio-V3-433MHz-100mW


    Holybro SiK Telemetry Radio V3 433MHz 100mW Features

    • Open source SiK firmware
    • Plug-n-play for Pixhawk Standard Flight Controllers
    • The Easiest way to connect your Flight Controller and Ground Station
    • Interchangeble air and ground radio
    • Micro-USB port (Type-C Adapter Cable Included)
    • 6-position JST-GH connector
    • 2-way full-duplex communication through adaptive TDM UART interface
    • Transparent serial link
    • MAVLink protocol framing
    • Built in FT230X/FT23 USB to BASIC UART conversion IC


    Holybro SiK Telemetry Radio V3 433MHz 100mW Specification

    Max RF Power

    20 dBm

    Receive Sensitivity

    -121 dbm @2kbps RF Data Rate, -105 dbm @64kbps RF Data Rate

    Antenna Gain

    2dBi

    RF Data Rates

    2, 4, 8, 16, 32, 64(default), 96, 128, 192, 250 kbps

    Serial Interface Data Rate

    1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6(default), 115.2 kbps

    Frequency Band

    414MHz - 460MHz

    Interference Immunity

    Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle

    Address Options

    Network ID: 0 –255

    Channels

    Up to 50 Frequency Hopping Channels

    Supported Network Topologies

    Point-to-point

    Configuration Method

    MissionPlanner or AT Commands

    Data Framing

    Standard or MAVLink protocol framing

    Error correction

    Corrects up to 25% of bit errors with open-source SIK firmware

    Serial Data Connector & Interface

    6-pin JST-GH connector, 3.3V-TTL

    USB

    Micro-USB

    SMA Connector

    RP-SMA female

    Power Connector

    NA

    Operating Temperature

    -40~85°C

    Dimension

    28 x 53 x 10.7mm (without antenna)

    Weight

    23.5g w/ antenna

    Input Voltage (DC)

    5V

    Supply voltage

    5V DC (from USB or JST-GH)

    Transmit current

    100 mA at 20 dBm

    Receive current

    25 mA

    Serial interface

    3.3 V UART


    Holybro-SiK-Telemetry-Radio-V3-433MHz-100mW

    Holybro SiK Telemetry Radio V3 433MHz 100mW Package Detail

    • 2x Holybro SiK Telemetry Radio V3 433MHz 100mW
    • 2x Antenna
    • 1x Micro-USB to USB-A Cable
    • 1x Micro-USB to Micro-USB OTG Adapter Cable
    • 1x Micro USB to Type-C Adapter
    • 1x JST-GH-6P to JST-GH-6P Cable *1 (for Pixhawk Standard FC)
    • 1x JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)

     

    User manual:

    Telemetry-Radio-V3-Quick-Start-Guide