Skip to Content

Herelink 1.1 – HD Video Transmission System

https://www.bzbuas.com/web/image/product.template/471/image_1920?unique=6bccd48

Herelink 1.1 puts the remote control, the ground station and the HD video link in one device. You fly, watch live video and follow telemetry on a bright screen that stays readable in sunlight, at up to 20km under FCC rules. The air unit takes two cameras, adds an Ethernet port for extra devices and works with The Cube, ArduPilot and PX4, so it suits mapping, inspection and rescue work alike.

8,129.27 zł 8129.27 PLN VAT Excluded
8,129.27 zł VAT Excluded
Price on request

    This combination does not exist.

    Herelink 1.1 — Control, HD Video and Telemetry in One Hand

    Herelink is an integrated remote control, ground station and wireless digital transmission system designed for use with the Cube autopilot, ArduPilot or PX4. Herelink allows transmission of RC control, HD video and telemetry data up to 20km between the ground station and the air unit. The Herelink remote control includes custom Solex TX and QGC applications, and both the air unit and the ground station are equipped with an integrated 8-core SoC for custom application development.

    Multifunctional Unit

    Certified in many countries, with FCC, CE, UKCA, IC and other certificates. It integrates the telemetry and video transmission module, dual HDMI in, dual S.Bus out, serial and Ethernet in one small unit. The air unit measures only 78.5x30x15mm.

    Herelink 1.1 air unit with connected cables
    Herelink 1.1 controller with QGroundControl and the open API

    Customizable and Upgradeable

    Open controller API and QGC code, so you can develop your own software and system. Both the air unit and the controller support firmware upgrades.

    Supports External Ethernet Devices

    The new Ethernet port is ready on the air unit. It supports external Ethernet devices, such as network cameras, light detection, gas detection and other Ethernet devices. Through the LAN interface, users can access the device without geographic limitations.

    Herelink 1.1 air unit with an Ethernet cable
    Herelink 1.1 controller screen with a map and video

    Sunlight Readable Screen with 1000nit Brightness

    The remote controller has a screen with 1000nit peak brightness, which improves visibility in sunlight. A good companion for surveying, mapping, rescue, industrial inspection and other uses.

    Temperature Control

    A new fan for the new dual video mode and other compute-intensive tasks. It helps prevent overheating by keeping the operating temperature in check, even under heavy load.

    Herelink 1.1 air unit with the cooling fan

    Herelink 1.1 Controller and Air Unit Layout

    Herelink 1.1 controller buttons, antennas and connectors
    Herelink 1.1 air unit connectors
    CubePilot Documentation

    The documentation for this product is on the manufacturer's website.

    docs.cubepilot.org/herelink/herelink-overview

    Herelink 1.1 – HD Video Transmission System Specification

    System

    Processor

    SoC – Pinecone S1

    SoC

    4x Cortex A53, 2.2GHz
    4x Cortex A53, 1.4GHz

    GPU

    4-core, Mali-T860

    SDR

    A7 + DSP

    Memory

    Air unit LPDDR3 1GB
    Controller LPDDR3 2GB

    Storage

    Air unit eMMC 4GB
    Controller eMMC 8GB

    Max Transmission Distance

    FCC 20km
    CE / SRRC / MIC 12km

    Video Latency

    110ms

    Video Stream

    720p@30fps, 1080p@30/60fps

    Frequency Band

    2.4GHz ISM

    Receive Sensitivity

    -99dBm@20MHz BW

    Interference Recovery

    < 1s

    Air Unit

    Case Material

    Aluminium alloy

    Weight

    98g (with antennas)

    Size

    78.5x30x15mm

    Signal Bandwidth

    20MHz / 10MHz

    Power Consumption

    Average up to 4W

    Micro HDMI 1

    Camera video signal input (recommended)

    Micro HDMI 2

    Camera video signal input

    Power Input

    Recommended about 7V, minimum 6V, maximum 12V (avoid sharing a BEC with servos)

    UART Interface

    3.3V UART

    S.Bus Interface

    Dual RC out, S.Bus1 and S.Bus2

    Micro USB

    Debugging and upgrading, OTG mode (no external power needed for the USB device)

    Button

    Pairing and state reset

    Indicator Lights 1, 2

    Pairing and video transmission state

    MMCX Antenna Jacks 1, 2

    Signal transmission and ground communication

    microSD Card Slot

    For future use

    ETH Interface

    Network protocol device access

    Controller

    Case Material

    Plastic

    Weight

    536g

    Size

    217x106.5x31mm (without external antennas and joysticks)

    Screen

    5.46in, 1080p, 16 million colours, capacitive touch screen

    Screen Brightness

    1000nit

    Audio

    1x built-in speaker, 2x built-in microphone

    Controls and Input

    2x Hall effect gimbals with removable sticks, 1x scroll wheel, 6x bottom button, 1x top button (right)

    Wireless Communication

    Bluetooth / Wi-Fi / GPS / 2.4GHz video link ground unit

    Indicator Lights

    2x tricolour LED (upper right and left corner)

    Interface

    1x Micro USB, 1x microSD card slot (up to 64GB)

    External Antennas

    1x directional antenna (5dBi), 1x omnidirectional antenna (2dBi), both detachable

    Built-in Antennas

    Wi-Fi, GPS, 1x external GPS antenna port

    Battery

    Built-in 4950mAh LiPo

    Charging

    Micro USB, 5V 2A

    Power Consumption

    Average up to 4W (video transmission only, medium screen brightness, Wi-Fi and GPS off)

    Herelink 1.1 – HD Video Transmission System Package Includes

    HX4-06211 Herelink Controller Unit
    • 1x Herelink 1.1 Controller Unit
    • 2x Herelink Controller Joystick
    • 1x Herelink Omnidirectional Antenna
    • 1x Herelink Directional Antenna
    • 1x Herelink Setup Tips Card
    HX4-06210 Herelink Air Unit
    • 1x Herelink 1.1 Air Unit
    • 1x Herelink Mounting Plate
    • 1x Herelink Screw Set
    • 1x Herelink Silicone Ring Set
    • 2x Herelink Taoglas Antenna
    • 1x Herelink Fan
    • 1x Herelink Cable Set
    • 1x Herelink HDMI Cable
    • 1x Herelink Setup Tips Card

    The product is divided into a ground station and an air unit and is sold in two separate packages.

    Herelink 1.1 package contents