T-Motor Velox V2306 V3 Brushless Motor
With the T-Motor Velox V2306 V3 Brushless Motor you pick the KV that fits the pack you fly. The KV1750 gives a 6S quad smooth, precise handling for flowing lines and bando sessions, while the KV2550 brings lively response to 4S builds. Upgraded materials and design make the third Velox generation an affordable way to power your next 5-inch freestyle or racing drone.
T-Motor Velox V2306 V3 Brushless Motor — Drive Your 5-Inch Quad on 4S or 6S
The T-Motor Velox V2306 V3 Brushless Motor is a 2306 motor from T-Motor's budget Velox series, made for 5-inch FPV drones flown in freestyle and racing, and a good choice for pilots starting out in FPV. Compared with the V2, T-Motor upgraded both the materials and the design. Choose from two KV variants: the purple KV1750 for 6S packs (820.7W max power and 34.9A peak current over 60s, 33.8g) and the pink KV2550 for 4S packs (533.7W and 34.5A, 32.6g). Both have a 12N14P configuration, a Ø27.9x30.65mm body, a 5mm shaft with an M5 thread, a 16x16mm M3 mounting pattern and 150mm 20AWG leads. In T-Motor's bench test on a T5147-3 propeller the KV1750 produced up to 1577.9g of thrust and the KV2550 up to 1221.6g.

KV1750 for Precise Flying on 6S
The purple KV1750 runs on 6S packs. It gives precise control and suits smooth, flowing lines as well as bando flying around abandoned buildings.

KV2550 for Flying on 4S
The pink KV2550 is the variant for 4S packs. Its higher KV makes up for the lower voltage: in T-Motor's test it spun the propeller at over 27,500 RPM at full throttle on 4S.

Upgraded Materials and Design
In the third version of the Velox V2306 T-Motor upgraded both the materials and the design of the motor. Inside it uses high-specification curved magnets and a single-strand winding that is resistant to high temperature.

Recommended Setup with the T-Motor Velox V2306 V3 Brushless Motor
T-Motor matches the Velox V2306 V3 with the following parts in a 5-inch drone.
Frame | 5-inch |
Flight Controller | T-Motor Velox F7 (e.g. Velox F7 SE 3-6S) |
4in1 ESC | T-Motor V50A 6S or V45A Lite 6S |
Propellers | |
Battery | 6S LiPo (KV1750) or 4S LiPo (KV2550) |
T-Motor Velox V2306 V3 Brushless Motor Test Report
T-Motor bench-tested both variants with three T-Motor propellers: P49436-3, T5143S-3 and T5147-3. The KV1750 was tested on a 6S supply (about 24V) and the KV2550 on a 4S supply (about 16V).
KV1750 (6S)
Propeller | Throttle | Voltage (V) | Current (A) | RPM | Thrust (g) | Power (W) | Efficiency (g/W) |
T-Motor P49436-3 | 20% | 24.0 | 1.9 | 11818.1 | 176.6 | 45.1 | 3.92 |
40% | 24.0 | 6.0 | 18030.9 | 439.4 | 142.9 | 3.07 | |
60% | 23.9 | 10.7 | 22021.2 | 664.2 | 255.2 | 2.60 | |
80% | 23.8 | 17.8 | 26399.3 | 953.8 | 422.3 | 2.26 | |
100% | 23.6 | 30.0 | 31486.2 | 1353.1 | 706.6 | 1.91 | |
T-Motor T5143S-3 | 20% | 24.0 | 1.9 | 11566.8 | 167.1 | 45.3 | 3.69 |
40% | 24.0 | 6.0 | 17835.1 | 426.8 | 143.1 | 2.98 | |
60% | 23.9 | 10.8 | 21876.9 | 659.1 | 258.2 | 2.55 | |
80% | 23.8 | 17.9 | 26306.5 | 961.5 | 425.3 | 2.26 | |
100% | 23.6 | 30.3 | 31362.7 | 1356.8 | 714.2 | 1.90 | |
T-Motor T5147-3 | 20% | 24.0 | 1.9 | 10732.8 | 186.2 | 46.6 | 4.00 |
40% | 24.0 | 6.2 | 16597 | 471.7 | 147.6 | 3.20 | |
60% | 23.9 | 11.9 | 20537.6 | 746.5 | 284.5 | 2.62 | |
80% | 23.7 | 20.9 | 25207.7 | 1145.2 | 495.8 | 2.31 | |
100% | 23.5 | 34.9 | 29715.1 | 1577.9 | 820.7 | 1.92 |

KV2550 (4S)
Propeller | Throttle | Voltage (V) | Current (A) | RPM | Thrust (g) | Power (W) | Efficiency (g/W) |
T-Motor P49436-3 | 20% | 16.0 | 2.3 | 10520.9 | 121.4 | 36.2 | 3.35 |
40% | 15.9 | 6.8 | 16221.2 | 332.5 | 108.3 | 3.07 | |
60% | 15.9 | 12.3 | 19987 | 531.8 | 195.3 | 2.72 | |
80% | 15.7 | 19.4 | 23741 | 758.5 | 305.6 | 2.48 | |
100% | 15.5 | 32.3 | 28139.9 | 1087.0 | 502.2 | 2.16 | |
T-Motor T5143S-3 | 20% | 16.0 | 2.3 | 10367.9 | 126.7 | 36.1 | 3.51 |
40% | 15.9 | 6.8 | 16014.8 | 330.3 | 108.8 | 3.04 | |
60% | 15.8 | 12.5 | 19778.6 | 521.8 | 197.4 | 2.64 | |
80% | 15.7 | 19.8 | 23611.5 | 762.9 | 310.8 | 2.45 | |
100% | 15.5 | 32.8 | 27994 | 1091.2 | 508.6 | 2.15 | |
T-Motor T5147-3 | 20% | 16.0 | 2.3 | 10315.5 | 137.8 | 36.2 | 3.81 |
40% | 15.9 | 6.9 | 15688 | 367.3 | 109.9 | 3.34 | |
60% | 15.8 | 12.8 | 19505.9 | 576.7 | 202.1 | 2.85 | |
80% | 15.7 | 20.6 | 23309.5 | 849.4 | 324.3 | 2.62 | |
100% | 15.5 | 34.5 | 27522.3 | 1221.6 | 533.7 | 2.29 |

Data from the T-Motor test bench, for reference. We drew the KV1750 thrust graph from T-Motor's test data.
T-Motor Velox V2306 V3 Brushless Motor Dimensions
T-Motor Velox V2306 V3 Brushless Motor Specification
Variant | KV1750 | KV2550 |
Configuration | 12N14P | |
Dimensions | Ø27.9x30.65mm | |
Shaft Diameter | 4mm inside the motor, 5mm outside (M5 thread) | |
Mounting Pattern | 16x16mm, 4x M3 | |
Leads | 20AWG, 150mm | |
Weight (Incl. Cable) | 33.8g | 32.6g |
Rated Voltage (LiPo) | 6S | 4S |
Idle Current (10V) | 0.85A | 1.95A |
Max. Power (60s) | 820.7W | 533.7W |
Peak Current (60s) | 34.9A | 34.5A |
Max. Thrust (T5147-3, 100% Throttle) | 1577.9g | 1221.6g |
T-Motor Velox V2306 V3 Brushless Motor Package Includes
- 1x T-Motor Velox V2306 V3 Brushless Motor (KV1750 or KV2550, as selected)
- 1x Mounting Hardware Set (Screws and Propeller Nut)
