BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version – Stable Power for FPV Micro Drones
BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version is designed for lightweight tiny whoop drones using 1S power and a BT2.0 connector. Its 300 mAh capacity provides a practical balance between flight time and weight, while the 30C/60C discharge rating supports responsive motor performance. The upgraded solid-pin connector reduces connection resistance, limits voltage sag, and helps maintain more consistent performance throughout the flight.
BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version Key Features
- 300 mAh Capacity: Provides suitable energy for lightweight FPV micro drones without adding excessive weight.
- 1S LiHV Configuration: A maximum voltage of 4.35 V supports the performance of tiny whoop power systems.
- 30C/60C Discharge Rating: Supports 9 A continuous current and a manufacturer-declared burst current of up to 15 A.
- Solid-Pin BT2.0 Connector: Reduces connection resistance and energy loss compared with PH2.0.
- Reduced Voltage Sag: Helps maintain responsive throttle performance and delays low-voltage warnings.
- 8.28 g Weight: Well suited to ultralight 65 mm drone platforms.
- Two Quantity Options: Available as one battery or a package containing eight batteries.
Stable Power With a BT2.0 Connector
The BT2.0 connector uses solid pins instead of the crimped contacts found in PH2.0 connectors. This lowers connection resistance and supports more stable current delivery during rapid throttle changes. Its 9 A continuous output is well suited to lightweight brushless 1S micro drones.
Easy Battery Identification
The BT2.0 version is slightly longer than the older PH2.0-equipped battery and is clearly marked BT2.0 on its label. This makes it easier to identify the correct pack when preparing several batteries before training, racing, or an extended flying session.
BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version Discharge Performance and Voltage Stability
Frequently asked questions - BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version
BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version fits 1S micro drones equipped with a BT2.0 connector and a battery holder suitable for a 300 mAh pack. Compatible examples include BetaFPV Meteor65, Meteor65 Pro, selected Air65 versions, and other 65 mm tiny whoops using the same power standard.
Yes. BT2.0 1S 300 mAh batteries are used with selected Cetus models and kits. Purchasing several packs allows pilots to replace the battery after each flight and spend less time waiting during training sessions.
No. BT2.0 and PH2.0 are different connector standards and cannot be connected directly. A suitable adapter or replacement BT2.0 power lead is required for equipment fitted with PH2.0.
Flight time depends on the drone, motors, and flying style. BetaFPV reports approximately two minutes of full-throttle flight with the Meteor65, while calmer flying can provide up to around four minutes.
Use a 1S LiHV charger with a BT2.0 port and a 4.35 V charging mode. BZB UAS offers the compact BetaFPV BT2.0 V2 Battery Charger and Voltage Tester, while the six-channel VIFLY WhoopStor 3 is suitable for charging several packs during the same session.
BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version Specifications
Model | BetaFPV BT2.0 300mAh 1S 30C Battery |
Capacity | 300mAh |
C-Rate | 30C / 60C |
Voltage | Max 4.35V |
Dimensions | 67.3mm x 11.8mm x 6.1mm |
Weight | 8.28g |
Connector | BT2.0 |
BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version Package Includes
- 1x or 8x BetaFPV BT2.0 300mAh 1S 30C LiHV Battery 2022 Version (depending on the selected variant)