Skip to Content
PLN
  1. All Products
  2. HQProp Thin Electric Pusher Prop 7X7R (2CW)
HQProp Thin Electric Pusher Prop 7X7R (2CW)

HQProp Thin Electric Pusher Prop 7X7R (2CW)

https://www.bzbuas.com/web/image/product.template/3550/image_1920?unique=0d8abe8
The HQProp Thin Electric Pusher Prop 7X7R (2CW) is the reverse-pitch, clockwise version from HQProp's Thin Electric line, built for rear-mounted motors. A 6mm bore with adaptor rings for 3, 3.17, 4, 5, 6 and 8mm shafts fits most common motors without a separate hub. Molded from glass-fiber reinforced nylon for strength under sustained high-RPM loads, it suits a wide range of pusher-motor builds, from long-range planes to flying wings.
11.38 zł 11.38 PLN VAT Excluded
11.38 zł VAT Excluded
  • Diameter
  • Pitch

This combination does not exist.

Contact Us
Diameter: 7"
Pitch: 7"

Terms and Conditions

HQProp Thin Electric Pusher Prop 7X7R (2CW) – Performance for Long-Range Flights

The HQProp Thin Electric Pusher Prop 7X7R (2CW) is a 2-blade, 7 inch reverse-pitch propeller from HQProp's Thin Electric line, built for rear-mounted, pusher-configuration motors on fixed-wing and flying-wing builds. Molded from glass-fiber reinforced nylon for strength under sustained high-RPM loads, this pack includes 2 clockwise propellers.

Key Features of the HQProp Thin Electric Pusher Prop 7X7R (2CW)

Made for the Rear Motor Position
Reverse-pitch design matched to a rear-mounted, pusher-style motor.

Tuned for Long Range
The 7-inch pitch balances lift and current draw for efficient, long-range cruise flight.

Glass-Fiber Reinforced Nylon Construction
Holds its precision airfoil shape under high RPM loads from high-torque brushless motors.

Lightweight, Precision Balanced
At just 7.36g, it adds minimal rotating mass for quick throttle response and efficient high-RPM operation.

Product photos are for reference only. The exact shade of the propeller may vary slightly from the photos shown.

HQProp Thin Electric Pusher Prop 7X7R (2CW) Suitable Applications

This pusher propeller suits rear-mounted motors on fixed-wing and flying-wing builds:

  • Fixed-wing and flying-wing builds with a rear-mounted (pusher) motor
  • sUAS platforms using a pusher-configuration motor

HQProp Thin Electric Pusher Prop 7X7R (2CW) Test Report

Bench-tested with a Rcinpower 3115-900KV motor across the full throttle range. Thrust efficiency peaks at low-to-mid throttle, making this pairing well suited to efficient cruise flight, with thrust and RPM headroom available at higher throttle for climb-outs or faster segments.

HQProp Thin Electric Pusher Prop 7X7R (2CW) bench test data

Recommended motor: Rcinpower 3115-900KV, matching the tested data above.

HQProp Thin Electric Pusher Prop 7X7R (2CW) Specification

Diameter

7 inch

Pitch

7 inch

Blades

2

Material

Glass-Fiber Reinforced Nylon

Weight

7.36g

Hub Diameter

12.7mm

Hub Thickness

7.5mm

HQProp Thin Electric Pusher Prop 7X7R (2CW) Kit Contents

  • 2x CW HQProp Thin Electric Pusher Prop 7X7R