Caddx Eclipse 009SH FT006-V3R Thermovision Camera
The Caddx Eclipse 009SH FT006-V3R Thermovision Camera shows heat in darkness, smoke and fog, where an ordinary camera sees nothing, and Pixelpump-Gen3 makes heat sources stand out with more detail. Fly on your analog link and watch the same picture on a second screen at the same time. A small camera head and a separate module fit even a tight build, so adding thermal vision to an FPV drone is easy.
Caddx Eclipse 009SH FT006-V3R Thermovision Camera — More Detail in Every Thermal Frame
The Caddx Eclipse 009SH FT006-V3R Thermovision Camera is an analog thermal FPV camera with an uncooled VOx detector, made of a 22x22x28.43mm camera head and a separate 33.5x33.5x16.5mm module connected by a cable. It delivers a 960x768 image (Pixelpump-Gen3) at 50Hz through a 9.1mm F1.0 lens with a 48.3° x 38.6° field of view (66° diagonal) and sends video over analog PAL and digital UVC at the same time, with an average latency of 20ms. It runs on 4.5-20V, typically draws under 1.5W, weighs 47g and works from -20°C to 50°C.

Product photos are for reference only. The actual color of the camera housing may differ from the photos shown.
Clearer Image with Pixelpump-Gen3
The camera uses third-generation Pixelpump-Gen3 technology, which raises image resolution, sharpens fine detail and makes heat sources more prominent, so you can see farther and more clearly. It also removes minor motion blur caused by drone vibration, keeping the picture smooth and stable in fast flight. The pictures below compare footage without Pixelpump-Gen3 (left) and with it (right).

Without Pixelpump-Gen3
With Pixelpump-Gen3
Small Camera Head, Separate Module
The 22x22x28.43mm camera head goes where the view is needed, and the 33.5x33.5x16.5mm module with all the connectors can sit elsewhere in the frame, joined to the head by a braided cable.


Caddx Eclipse 009SH FT006-V3R Thermovision Camera Key Features
Sharp Thermal Image
The camera delivers a 960x768 thermal image (Pixelpump-Gen3) at 50Hz. Heat sources stand out more clearly from the background, so objects are easier to spot in flight.
Analog and Digital at Once
Video goes out over analog PAL and digital UVC at the same time. You can fly on an analog video transmitter and watch the same picture on a UVC device, such as a computer.
Wide Power Range
The camera runs on 4.5-20V and typically draws under 1.5W. You can power it directly from a 2S-4S pack, and on 5S or 6S from a regulated output within this range, such as a BEC.
Image Adjustment
Brightness and contrast (0-100), color palettes (0-4), horizontal, vertical or diagonal image flip and the 1.0-4.0x stepless digital zoom are set over UVC. You match the image to the conditions and to how the camera is mounted.
Caddx Eclipse 009SH FT006-V3R Thermovision Camera Interfaces
The connectors are on the module, numbered as in the drawing below.
- Power/CVBS, power supply and analog video output
- Control Connection, control connector
- ADKEY, menu control connector (ADKEY, GND)
- UVC, digital video over USB (DP, DM, GND, VBUS)

Connect a UVC (USB Video Class) cable to get digital video in MJPEG format at 640x512. Brightness, contrast, color palette, image flip and zoom are adjusted over the UVC protocol.

Caddx Eclipse 009SH FT006-V3R Thermovision Camera Specification
Model | Eclipse 009SH |
Sensor | Uncooled VOx detector |
Resolution | 960x768 (Pixelpump) |
Frame Rate | 50Hz |
Video Interface | PAL + UVC (simultaneous analog and digital output) |
UVC Output | MJPEG, 640x512 |
Average Latency | 20ms |
Supply Voltage | 4.5-20V |
Typical Power Consumption | <1.5W |
Focal Length | 9.1mm |
Aperture | F1.0 |
Field of View | 48.3° (H) x 38.6° (V), 66° (D) |
Adjustment Method | UVC / ADKEY |
Brightness / Contrast | 0-100 |
Color Palette | 0-4 |
Digital Zoom | 1.0-4.0x stepless (controlled via UVC) |
Image Flip | Horizontal / Vertical / Diagonal |
Operating Temperature | -20°C to 50°C |
Camera Dimensions | 22x22x28.43mm |
Module Dimensions | 33.5x33.5x16.5mm |
Weight | 47g |
Caddx Eclipse 009SH FT006-V3R Thermovision Camera Package Includes
- 1x Caddx Eclipse 009SH FT006-V3R Thermovision Camera
- 1x 3-Pin Silicone Cable
The camera is made for direct installation and ships in plain technical packaging, not in a retail box.