Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black
| Diameter: 10" |
| Pitch: 5" |
Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black – Stable Thrust for Larger Cinelifter Builds
Gemfan designed the 1050W around the needs of larger cinelifter drones, where predictable thrust and stability under payload matter more than aggressive racing response. Its wide blade profile and three-blade layout are intended to keep the aircraft controlled when carrying additional equipment, while reinforced glass fiber nylon improves durability compared with a conventional unreinforced propeller. The 2L+2R package provides a complete four-propeller set for a quad configuration.
Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black Key Features
- Designed around cinelifter applications – the wide blade geometry is intended to maintain stable flight when the aircraft is carrying additional payload.
- Reinforced glass fiber nylon construction – provides additional stiffness and durability for larger propellers working under higher loads.
- Three-blade layout focused on controlled flight – suitable for builds where smooth thrust delivery and predictable handling are more important than minimum propeller mass.
- Wide blade profile – increases the working blade area and is one of the main design differences of the 1050W Cinelifter series. Gemfan specifies a maximum blade width of 26mm.
- Complete 2L+2R set – four propellers allow a complete quad set to be replaced without purchasing separate rotation directions. The corresponding distributor listing confirms four propellers: 2 CW and 2 CCW.
- Manufacturer bench-test data available – Gemfan publishes test results for the 1050W with a 3214 800KV motor at 22.2V, giving a useful reference when designing a propulsion system.
Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black Frequently Asked Questions (FAQ)
Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black is designed for larger 10-inch cinelifters and heavy-lift FPV drones carrying cameras or other additional payload. Gemfan uses a wide three-blade profile specifically to provide stable, controlled flight under higher load.
Gemfan recommends a 3214 800KV motor for Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black. The manufacturer tested this exact propeller with a 3214 800KV motor at 22.2V, which corresponds to the nominal voltage of a 6S LiPo system.
In Gemfan's test with a 3214 800KV motor at 22.2V, Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black produced 3,923g of thrust at 100% throttle. The same test recorded 67.50A current and 14,234 RPM, so these figures should be read as the result of that specific motor and voltage configuration.
Gemfan 1050W is the wider and heavier version aimed at cinelifters carrying larger payloads. The 1050W weighs 25g per propeller and has a maximum blade width of 26mm, while the standard 1050 weighs approximately 16.8g and is positioned as the lighter option for 10-inch aerial platforms. Both use a 10 × 5-inch three-blade layout, but the 1050W puts greater emphasis on stability under heavy load.
Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black Test Report
Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black Specifications
Model | Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade |
Blade Count | 3 (Tri-Blade) |
Diameter | 10 inch (254mm) |
Pitch | 5 inch |
Weight | 25g |
Material | Glass Fiber Nylon |
Hub Thickness | 9mm |
Mounting Hole | 5mm |
Color | Black |
Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black Package Includes
- 2x CW Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black
- 2x CCW Gemfan 1050W Cinelifter Glass Fiber Nylon 3 Blade 2L+2R Prop - Black
