HQProp Thin Electric Pusher Prop 7X12R (2CW)
| Diameter: 7" |
| Pitch: 12 |
Performance for Long-Range Flights – HQProp Thin Electric Pusher Prop 7X12R (2CW)
The HQProp Thin Electric Pusher Prop 7X12R (2CW) is a 2-blade, 7 inch reverse-pitch propeller from HQProp's Thin Electric line, built for rear-mounted, pusher-configuration motors on fixed-wing and flying-wing builds. Molded from glass-fiber reinforced nylon for strength under sustained high-RPM loads, this pack includes 2 clockwise propellers.
Key Features of the HQProp Thin Electric Pusher Prop 7X12R (2CW)
Made for the Rear Motor Position
Reverse-pitch design matched to a rear-mounted, pusher-style motor.
CCW Counterpart Available
Clockwise rotation pairs with the 7X12 (2CCW) when a build needs the opposite direction too.
Glass-Fiber Reinforced Nylon Construction
Holds its precision airfoil shape under high RPM loads from high-torque brushless motors.
5mm Direct-Mount Shaft
Precision-fit 5mm shaft bore for a direct, secure mount.
Product photos are for reference only. The exact shade of the propeller may vary slightly from the photos shown.
HQProp Thin Electric Pusher Prop 7X12R (2CW) Suitable Applications
This pusher propeller suits rear-mounted motors on fixed-wing and flying-wing builds:
- Fixed-wing and flying-wing builds with a rear-mounted (pusher) motor
- sUAS platforms using a pusher-configuration motor
- If your build runs a second motor spinning the opposite way, pair it with the matching HQProp Thin Electric Prop 7X12 (2CCW)
HQProp Thin Electric Pusher Prop 7X12R (2CW) Specification
Diameter | 7 inch |
Pitch | 12 inch |
Blades | 2 |
Material | Glass-Fiber Reinforced Nylon |
Weight | 7.4g |
Hub Diameter | 12.4mm |
Hub Thickness | 8mm |
Shaft Bore | 5mm |
HQProp Thin Electric Pusher Prop 7X12R (2CW) Kit Contents
- 2x CW HQProp Thin Electric Pusher Prop 7X12R