Skip to Content

T-Motor V605 KV210 12S VTOL Brushless Drone Motor

https://www.bzbuas.com/web/image/product.template/3774/image_1920?unique=1bae596

The T-Motor V605 KV210 12S VTOL Brushless Drone Motor is built for VTOL aircraft that carry a real payload. It gives a heavy airframe a generous thrust reserve for every takeoff, hover and transition, so it lifts off confidently even when fully loaded. Heat-resistant materials, active cooling and IP45 protection keep it working flight after flight in the field, so you can focus on the mission instead of the motors.

593.50 zł 593.5 PLN VAT Excluded
593.50 zł VAT Excluded
Price on request

    This combination does not exist.

    T-Motor V605 KV210 12S VTOL Brushless Drone Motor — Power for Heavy VTOL Airframes

    The T-Motor V605 KV210 12S VTOL Brushless Drone Motor is a lift motor from the T-Motor V series, designed for the vertical takeoff and landing propulsion of VTOL aircraft. It runs on 12S LiPo packs (42-52V) and, on the recommended V22x7.4 propeller, produced up to 12,761g of thrust at full throttle in the manufacturer's bench test. It handles 70A peak current and 3200W of power for 180 seconds. The 24N28P motor measures Ø68.8x39.9mm and weighs 340g (385g with cables). It has IP45 protection, 626ZZ bearings and 600mm 14AWG leads. T-Motor recommends it for composite-wing VTOL aircraft with a quad takeoff weight of 18-24kg, paired with the FLAME 80A 12S V2.0 ESC.

    T-Motor V605 KV210 12S VTOL Brushless Drone Motor with a carbon propeller

    Built to Withstand Heat

    In a VTOL aircraft the lift motors do the hardest work during takeoff, hover and transition. The V605 is wound with enamelled wire rated to 220°C (Class C) and uses curved magnets rated to 150°C (Class E), which strengthens its passive heat resistance. A centrifugal fan structure improves active heat dissipation, and the stator has an anti-rust treatment and coatings resistant to 180°C.

    Rotor and stator of the T-Motor V605 KV210 12S VTOL Brushless Drone Motor

    The V Series for VTOL Propulsion

    T-Motor designed the V series specifically for VTOL power systems. These motors combine plenty of power with a high thrust-to-weight ratio, strong overload capability and adaptability to the environment they work in, all to keep every flight safe.

    T-Motor V series VTOL motors

    T-Motor V605 KV210 12S VTOL Brushless Drone Motor Key Features

    Plenty of Thrust in Reserve

    In T-Motor's bench test on a V22x7.4 propeller the V605 reached 12,761g of thrust at full throttle. With 4.5-6kg per motor recommended for VTOL flight, that leaves a solid reserve for takeoff and transition.

    Heat Resistant

    The winding wire is rated to 220°C (Class C) and the magnets to 150°C (Class E). That headroom matters when long hover phases heat the motor up.

    Active Cooling

    A centrifugal fan structure improves the motor's active heat dissipation. Less heat means more stable operation on long flights.

    Ready for Field Work

    IP45 protection, an anti-rust treated stator and coatings resistant to 180°C prepare the V605 for outdoor work, where water spray is part of the job.

    Made for 12S

    It runs on 12S LiPo packs (42-52V) and handles 70A peak current and 3200W for 180 seconds. A higher voltage means less current for the same power.

    Precision Build

    The rotor is dynamically balanced to ≤5mg and runs on 626ZZ bearings. A well-balanced rotor sends less vibration into the airframe and the flight controller.

    Recommended VTOL Propulsion Setup with the T-Motor V605 KV210 12S VTOL Brushless Drone Motor

    T-Motor recommends the following setup for a composite-wing VTOL aircraft built around the V605.

    Lift Motors

    Motor

    V605 KV210

    Propeller

    V22x7.4

    ESC

    FLAME 80A 12S V2.0

    Battery / Voltage

    12S LiPo (4.2V/cell) / 42-52V

    Thrust per Motor

    4.5-6kg

    MTOW (Quad)

    18-24kg

    Pusher Motor

    Motor

    AT5230 KV200 / AT5330 KV220

    Propeller

    19-20 inch

    ESC

    AT115A

    Battery / Voltage

    12S LiPo (4.2V/cell) / 42-52V

    Thrust

    4-6kg

    In a coaxial configuration, allow for a 25% loss of performance.

    T-Motor V605 KV210 12S VTOL Brushless Drone Motor Test Report

    T-Motor bench-tested the V605 with a T-Motor V22x7.4 propeller at 46.6-47.9V. Selected measurement points are shown below.

    Throttle

    Thrust (g)

    Current (A)

    Input Power (W)

    Efficiency (g/W)

    RPM

    40%

    2898

    7.21

    345.38

    8.39

    3444

    50%

    4385

    12.94

    618.17

    7.09

    4226

    60%

    5788

    19.46

    927.06

    6.24

    4859

    70%

    7383

    28.11

    1334.04

    5.53

    5487

    80%

    9108

    38.69

    1827.49

    4.98

    6025

    90%

    10917

    52.16

    2448.72

    4.46

    6561

    100%

    12761

    68.30

    3182.62

    4.01

    7036

    Motor surface temperature after 10 minutes at 80% throttle was 98°C at an ambient temperature of 22°C. Data from the T-Motor test bench, for reference.

    T-Motor V605 KV210 12S VTOL Brushless Drone Motor Dimensions

    T-Motor V605 KV210 12S VTOL Brushless Drone Motor technical drawing

    T-Motor V605 KV210 12S VTOL Brushless Drone Motor Specification

    Model / KV

    V605 KV210

    Configuration

    24N28P

    Motor Size

    Ø68.8x39.9mm

    Shaft Diameter

    6mm

    Bearings

    626ZZ (imported)

    Leads

    14AWG, 600mm

    Battery / Voltage

    12S LiPo (4.2V/cell), 42-52V

    Idle Current (18V)

    1.6A

    Peak Current

    70A (continuous for 180s)

    Max Power

    3200W (continuous for 180s)

    Max Thrust

    12,761g (V22x7.4, 100% throttle)

    Internal Resistance

    48mΩ

    Stator

    Anti-rust treatment, coatings resistant to 180°C

    Magnet Temperature Rating

    Class E, 150°C

    Winding Wire Temperature Rating

    Class C, 220°C

    Coil Withstand Voltage

    500V / 5s

    Rotor Dynamic Balance

    ≤5mg

    Ingress Protection

    IP45

    Recommended ESC

    FLAME 80A 12S V2.0

    Recommended Propeller

    V22x7.4

    Weight

    340g (385g with cables)

    T-Motor V605 KV210 12S VTOL Brushless Drone Motor Package Includes

    • 1x T-Motor V605 KV210 12S VTOL Brushless Drone Motor
    • 1x Mounting Parts Bag
    T-Motor V605 KV210 12S VTOL Brushless Drone Motor package contents