T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller
The T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller is for fixed-wing pilots who want to cover ground faster. Its 13-inch pitch is tuned for the higher cruise speed range, and airfoils refined in CFD and matched to T-Motor AT motors keep that cruise efficient. A light, stiff carbon and PMI foam build handles frost, heat and salty air, flight after flight.
| Diameter: 20" |
| Pitch: 13" |
T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller — Built for Faster Cruise
The T-Motor AUZ20×13 is a two-blade propeller with a 20-inch (508mm) diameter and a 13-inch (330.2mm) pitch, made for electric fixed-wing UAVs, flying wings and VTOL aircraft. It is molded in one piece from resin-based carbon fiber composite with a PMI foam core, weighs 50g and has a matte finish. It mounts on a 10mm motor shaft with central locking. T-Motor recommends running it at up to 8650RPM and 16kg of thrust, with a limit of 9500RPM and 20kg, and pairs it with its AT5230, AT5330 or AT7215 motors. Of the 20-inch AUZ pitches in our shop, the 13-inch one is tuned for the higher cruise speed range. You get one propeller.
Product photos are for reference only. The exact color of the propeller may vary slightly from the photos shown.
Airfoils Designed for Electric Fixed-Wing UAVs
T-Motor developed the AUZ airfoils specifically for electric fixed-wing UAVs. They raise aerodynamic efficiency and reduce noise at the same time. Every profile was verified in CFD flow simulation down to individual blade sections, so the aerodynamics are optimized along the whole length of the blade.
Tuned for Efficient Cruise
Every pitch in the AUZ series is optimized for its own airspeed range. When you choose the pitch that matches your flight envelope, the propeller works at its highest efficiency at the speed you actually cruise at, so the battery goes further.
Quick and Precise Response
T-Motor optimized the center of gravity and reduced the rotational inertia of the blade. The propeller speeds up and slows down faster, and in the manufacturer’s comparison with a standard propeller its thrust follows throttle changes more closely. That means more precise flight control.
Stronger, Stiffer Structure
The carbon layup is designed for the conditions of fixed-wing flight. Prepreg, a PMI foam core and one-piece molding give a balance of low weight, high stiffness and high strength, so the blade resists deformation and lasts longer.
Bending and Torsion Resistant Layup
Fiber orientation and ratio are chosen to maximize strength and stiffness.
Prepreg Compression Molding
The propeller is formed in one piece, with porosity below 1% for stable, reliable quality.
PMI Foam Core
A light, high-strength core adds stiffness while keeping the total weight down.
How the AUZ Series Is Made
Behind every AUZ propeller are CNC-machined molds, composite molding presses, and testing and validation of the finished parts.
CNC-Machined Molds
Composite Molding
Testing and Validation
T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller Key Features
Matched to AT Motors
Chord length and angle of attack are matched to the RPM and torque of T-Motor AT motors. The whole power system uses less energy, so you get more flight time.
Light and Stiff
Carbon fiber with a PMI foam core, 50g for a 20-inch propeller. Low weight and high stiffness help the blade keep its shape under load.
Ready for Harsh Conditions
Rated from −30°C to 60°C (without icing on the surface) and resistant to moisture, salt spray and UV. Field missions don’t have to wait for perfect weather.
Clear Thrust Limits
Recommended up to 16kg of thrust at 8650RPM, with a limit of 20kg at 9500RPM. Clear numbers make it easy to size your power system.
T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller Suitable Applications
T-Motor designed the AUZ20×13 for conventional fixed-wing aircraft, flying wings and VTOL UAVs. It works in missions such as:
- Surveying and mapping
- Logistics and delivery
- Power line inspection
- Agricultural plant protection
- Emergency response
- Security and surveillance
T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller Test Report
T-Motor measured the AUZ20×13 at 22°C and 25m altitude, from 5000 to 9900RPM. At 8500RPM, just below the recommended 8650RPM, it delivers 15621gf of thrust at 4660.10W, which is 3.35gf/W. Efficiency is highest at lower RPM and reaches 7.40gf/W at 5000RPM.
| RPM | Torque (N·m) | Thrust (gf) | Power (W) | Efficiency (gf/W) |
| 5000 | 1.54 | 5958 | 805.37 | 7.40 |
| 5350 | 1.78 | 6819 | 995.20 | 6.85 |
| 5700 | 2.04 | 7703 | 1219.94 | 6.31 |
| 6050 | 2.34 | 8611 | 1482.80 | 5.81 |
| 6400 | 2.67 | 9542 | 1787.00 | 5.34 |
| 6750 | 3.02 | 10496 | 2135.74 | 4.91 |
| 7100 | 3.41 | 11474 | 2532.24 | 4.53 |
| 7450 | 3.82 | 12476 | 2979.71 | 4.19 |
| 7800 | 4.26 | 13501 | 3481.37 | 3.88 |
| 8150 | 4.73 | 14549 | 4040.43 | 3.60 |
| 8500 | 5.24 | 15621 | 4660.10 | 3.35 |
| 8850 | 5.77 | 16717 | 5343.60 | 3.13 |
| 9200 | 6.33 | 17835 | 6094.14 | 2.93 |
| 9550 | 6.91 | 18978 | 6914.94 | 2.74 |
| 9900 | 7.53 | 20143 | 7809.19 | 2.58 |
Ambient temperature 22°C, altitude 25m. Data may vary under different test standards, equipment and conditions.
Recommended motors: T-Motor AT5230, AT5330 or AT7215.
T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller Dimensions
T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller Specification
Model | T-Motor AUZ20x13 |
Diameter | 20 inch (508mm) |
Pitch | 13 inch (330.2mm) |
Number of Blades | 2 |
Weight | 50g (one propeller) |
Recommended Max RPM | 8650RPM |
Recommended Max Thrust | 16kg |
Limit RPM | 9500RPM |
Limit Thrust | 20kg |
Material | Resin-based carbon fiber composite + PMI foam core |
Surface Finish | Matte |
Type | Carbon fiber straight propeller |
Mounting | Ø10mm motor shaft, central locking |
Operating Temperature | −30°C to 60°C |
Recommended Motor | T-Motor AT5230 / AT5330 / AT7215 |
Application | Fixed-wing, flying wing and VTOL UAVs |
T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller Package Includes
- 1x T-Motor AUZ20×13 Fixed-Wing Carbon Fiber Propeller
