Skip to Content

Herelink HD Air Unit

https://www.bzbuas.com/web/image/product.template/473/image_1920?unique=1fa12e6
Herelink is an integrated remote control, ground station and wireless digital transmission system designed for use with a Cube, Ardupilot or PX4 autopilot.
2,763.41 zł 2763.41 PLN VAT Excluded
2,763.41 zł VAT Excluded

This combination does not exist.

Herelink HD Air Unit - Air unit for special tasks

Herelink is an integrated remote control, ground station and wireless digital transmission system designed for use with the Cube autopilot, Ardupilot or PX4. Herelink allows transmission of RC control, HD video and telemetry data up to 20 km between the ground station and the air unit. The Herelink remote control includes custom Solex TX and QGC applications, and both the air unit and ground station are equipped with an integrated 8-core SOC for custom development applications. More on the news from CubePilot in our article. 

The Herelink HD Air Unit HX4-06210 is connected to a 2.4 GHz network. The Herelink HD Kit is supported by both the Arduipilot and the PX4 Flight Stack. It is characterized by low power consumption, below 4W, with a battery capacity of 4950 mAh. Thanks to its long-lasting battery, Herelink’s wide range of functions can be used for several hours.

Herelink-HD-Air-Unit

Herelink HD Air Unit Updated Points

  • Ethernet port added on the Herelink air unit
  • SD card slot added on the Herelink air unit
Herelink-HD-Air-Unit


 Product includes only Herelink HD Air Unit, we also offer controller HereLink (base station) and a complementary set.

Herelink HD Air Unit Specifications

Weight

98g

Size

78.5mm x 30mm x 15mm

Signal Bandwidth

20MHz / 10MHz

Power Consumption

The average power consumption does not exceed 4W

Micro HDMI 1

Camera video signal input (Recommend)

Micro HDMI 2

Camera video signal input

Power Input

Recommended supply voltage ~7V: minimum 6V, maximum 12V and avoid sharing BEC with servos

UART Interface

3.3V UART

S.bus Interface

Dual RCout, S.bus1 and S.bus2

Micro USB

Used for debugging and upgrading, support OTG mode* 

(no need external power for USB device*)

Button

Used for pairing and state reset

Indicator light 1, 2

Used to indicate state for pairing and video transmission

MMCX antenna jack 1, 2

Used for signal transmission and ground communication

SD Slot

For future usage

ETH Interface

Network protocol device access

Package Herelink HD Air Unit Includes


    1x Herelink Air Unit

    1x Herelink Mounting Plate

    1x Herelink Screw Set

    1x Herelink Silicone Ring Set

    2x Herelink Taoglas Antenna

    1x Herelink Fan

    1x Herelink Cable Set

    1x Herelink HDMI Cable​

    1x Herelink Set up tips card